Moving a boiler: can you do it, and where can it go?
Yes, most boilers can be moved. The new spot needs a safe route for the flue, a gas pipe big enough for the boiler, and a drain for the condensate pipe. A Gas Safe engineer must do the work. It also has to be reported under building regulations.
Updated 15/11/2026 · Express Contractors
People move boilers for all sorts of reasons. Some want more space in the kitchen. Others want the noise out of a bedroom, or are planning a new kitchen or an extension. A move is often a good time to replace your boiler too, and we explain why further down. If your boiler has stopped working and you just need it fixed, see our boiler repair page instead. This guide is part of our boiler problems and advice series.
Can you move a boiler?
Yes, in most homes a boiler can be moved to a new room, a cupboard or the loft. Combi and system boilers are the easiest to move. They work on a sealed system, so they don't need a tank in the loft.
A regular boiler (also called heat-only) is harder. It works with a tank in the loft, and that tank must sit higher than the rest of the system. So a regular boiler can't usually go up into the loft. A system or regular boiler also has a hot water cylinder. Moving the boiler may mean moving the cylinder or its pipes too.
If you have a regular boiler, a move is a natural time to think about switching from a regular boiler to a combi. Not sure which type suits you? Our guide on whether a system boiler or combi is better explains the difference.
What does a new boiler spot need?
A new spot needs a way out for the waste gases, a gas supply, a drain and water pipes.The flue route is usually the thing that decides where a boiler can go. Here is the full list:
- A flue route. The flue is the pipe that takes waste gases outside. It needs a safe place to come out.
- A gas pipe. It must be wide enough to feed the boiler at full power, all the way from the meter.
- A condensate drain. The condensate pipe is a small plastic pipe. It carries slightly acidic water from the boiler to a drain.
- Water and heating pipes. These run to the radiators, and to the hot taps on a combi.
- A power supply. Every modern boiler needs electricity for its fan, pump and controls.
- Room to work. The maker sets gaps around the boiler, so an engineer can service it each year.
Where should a boiler flue go?
The end of the flue must sit a safe distance from windows, doors, air bricks and other openings.That stops waste gases drifting back into your home or a neighbour's. The exact distances come from the boiler maker's instructions.
As one example, many makers ask for about 300 mm between the flue and a window that opens. Gutters, corners and the edge of your land have their own distances. If the flue ends less than 2 metres above the ground, a balcony or a flat roof people walk on, it needs a guard. The maker's rules come first. Then come the British Standard for flues (BS 5440-1) and the building regulations.
A flue can come out through a wall, or go straight up through the roof. A roof flue is common for a boiler in the loft. If you're a leaseholder, check with your freeholder before a new hole goes in an outside wall.
Does moving a boiler mean a new gas pipe?
Often, yes. The gas pipe from the meter has to be wide enough that the pressure hardly drops on the way. The British Standard allows a drop of no more than 1 mbar from the meter to the boiler at full use.
A combi burns a lot of gas when you run a hot tap. If it moves further from the meter, the longer pipe adds friction. So the whole run may need a wider pipe, including the old part. The engineer measures the route and checks the pressure. This is the cost many people don't expect.
Where does the condensate pipe go?
The condensate pipe must run downhill to a drain. That can be a sink waste, the main soil pipe, an outside drain or a soakaway. An inside route is best, because it can't freeze.
Trade guidance asks for a pipe of at least 22 mm inside the house, falling at least 45 mm for every metre. Any part outside should be 3 metres or less, with a wider 32 mm pipe and weatherproof lagging. That's why loft and garage moves need extra care. A long, cold run can lead to a frozen condensate pipe in winter, and the boiler stops.
Can you put a boiler in the loft?
Yes, a combi or system boiler can go in the loft, if the loft is set up for it. It frees up a cupboard downstairs. But the engineer needs safe, easy access for every service and repair.
Boiler makers usually ask for these in the loft:
- a fixed loft ladder that folds away
- a fixed light
- a boarded floor around the boiler, and a boarded walkway to it from the hatch
- a guard or rail around the hatch
- frost protection, and a condensate route that won't freeze
- a wall or frame strong enough to hold the boiler's weight
Bear in mind that a leak in the loft can damage the ceilings below. A pressure gauge up there is also harder to check than one in a kitchen cupboard.
Can a boiler go in a cupboard, garage, bathroom or bedroom?
Yes, in most cases, as long as the boiler is room-sealed. That means it takes its air from outside through the flue, not from the room. Nearly every modern boiler is built this way.
| Spot | Usually OK? | What to watch |
|---|---|---|
| Cupboard or airing cupboard | Yes | Keep the maker's gaps. Use a door or panel that comes off easily. Don't fill it with stored things. |
| Garage | Often | Frost is the main risk. Lag the pipes and keep the condensate pipe inside if you can. Protect it from knocks by a car. |
| Bathroom | Yes, if room-sealed | The law allows only room-sealed gas appliances here. The electrics must follow the bathroom wiring rules. |
| Bedroom | Yes, if room-sealed | Bigger boilers must be room-sealed here. Some people move it out because of the noise at night. |
The bathroom and bedroom rules come from the Gas Safety (Installation and Use) Regulations 1998. They also cover a cupboard that opens into one of those rooms. Most boilers are made to go indoors.
Safety first
Smell gas? Open doors and windows. Don't use light switches or anything that could spark. Turn the gas off at the meter if you can do it safely. Then go outside and call the National Gas Emergency number on 0800 111 999.
Headaches, dizziness, sickness or a lazy yellow flame? These can be signs of carbon monoxide (CO), a poison gas you can't see or smell. Turn the boiler off, open windows, get everyone outside and call 0800 111 999. See a doctor if anyone feels unwell. Our carbon monoxide advice has more.
Never open the boiler case. Only a Gas Safe registered engineer should take the cover off a gas boiler. The checks in our guides are all ones you can do from the outside.
Do you need permission to move a boiler?
You don't need to apply yourself, but the move must be reported under building regulations. Your Gas Safe registered engineer does this. Planning permission is rarely needed.
- Building regulations. Moving a gas boiler is "notifiable" work. That means the council must be told. The engineer reports it through the Gas Safe Register within 30 days. A Building Regulations Compliance Certificate then comes to you by post. If it doesn't arrive, you can check on the Gas Safe Register website. Buyers' solicitors ask for it when you sell.
- Planning permission. Work inside the house doesn't usually need it. In England, a flue on an outside wall is normally allowed without it. In a conservation area, the flue shouldn't go on a front or side wall facing a road. For a listed building, ask the council first.
- Landlord or freeholder. If you rent, or own a leasehold flat, get their permission before any work starts.
Is moving a boiler a big job?
It's more work than swapping a boiler in the same spot. The move needs new gas, water and condensate pipes, a new flue and new holes in the walls. How long it takes depends on how far the boiler goes and the route the pipes take.
A straight boiler swap is often done in a day. A move takes longer, because of the extra pipework. We'll tell you how long yours should take at the free survey.
What affects the cost of moving a boiler?
The cost depends mostly on how far the boiler goes and how much new pipework it needs. A move into the next cupboard costs far less than a move up into the loft. These are the main things that change the price:
- how far it's going, and whether it changes floor (upstairs to downstairs, or into the loft)
- the flue: a short flue through a wall, a longer run, or a flue up through the roof
- whether the gas pipe needs to be wider for the longer run
- how far the condensate pipe has to go to reach a drain
- whether the loft already has a ladder, boarding and a light
- a system or regular boiler, where the cylinder or tanks may need to move too
- if you're fitting a new boiler at the same time
We don't publish a price for moving a boiler, because every home and route is different. We look at your home at a free boiler survey. Then we give you a fixed price before any work starts. All our work is guaranteed for 12 months, parts and labour.
Should you replace your boiler when you move it?
If your boiler is old or keeps breaking down, it usually makes sense to fit a new one in the new spot. Most of the work is the same either way. If the boiler is young and reliable, moving it is perfectly sensible.
- The new pipes, the flue route and the holes are needed either way. Doing both at once means one job and one lot of mess.
- An old boiler in a new spot is still an old boiler. If yours is over about 10 years old, read how long a boiler lasts before you decide.
- The old flue usually can't be used again in a new spot. Parts for older models also get harder to find.
- A move is a good time to change type, for example from a regular boiler to a combi. We fit all boiler types and do conversions between them.
Thinking about a new boiler in a new place? We can plan both at the same survey. If your boiler is breaking down now, start with a boiler repair visit. The engineer first runs a thorough check to find the fault and the parts needed. We give you the price before starting the work.
When to call a Gas Safe engineer
Moving a boiler is never a DIY job. By law, any work on gas boilers and gas pipes must be done by a Gas Safe registered engineer. Call one before you plan a new kitchen or an extension, so the boiler's new spot is part of the plan from the start.
- you want the boiler in a different room, a cupboard or the loft
- a new kitchen or an extension means the boiler has to come off its wall
- you'd like to move the flue
- you're thinking of switching boiler type at the same time
We're Gas Safe registered (business number 574642), with over 20 years' experience. See our Gas Safe engineer page for the other gas work we do. A yearly boiler service keeps the boiler running well in its new home.
Other boiler guides
- Combi vs system boiler: stored hot water, cylinders and which suits your home.
- Combi vs regular boiler: loft tanks, heat-only boilers and switching to a combi.
- How long does a boiler last?: signs it's wearing out, and repair or replace.
- Frozen condensate pipe: how to thaw it safely.
- Radiator cold at the bottom or top: air, sludge and how to bleed a radiator.
- Hot water but no heating: thermostat, timer and valve checks.
- Boiler losing pressure: what the gauge should read and how to top it up.
- Heating works but no hot water: checks to try, and the reverse problem.
- Leaking boiler: what to do first, and where the water is coming from.
- Boiler won't turn on: the checks to try first, and what a pilot light is.
- Boiler keeps turning off: lockouts, short cycling and when to reset.
- Boiler not working after a power cut: how to reset it, and set the timer clock.
- Boiler making noise: what banging, gurgling and kettling mean.
- Boiler pressure too high: what is too high, and how to lower it safely.
- Boiler tripping the electrics: why it trips the fuse box, and who to call.
- Vaillant boiler fault codes: what F22, F28, F75 and other codes mean.
- Worcester Bosch boiler fault codes: what EA 227, CE 207, 224 and other codes mean.
- Ideal boiler fault codes: what L2, F1, L1 and other codes mean.
- TRV not working: how to free a stuck pin, set the numbers or replace a head.
- Smell gas?: what to do straight away, and who to call.
- Carbon monoxide alarm beeping: what the beeps mean and what to do.
- All common boiler problems.
Ready to move your boiler, or swap it for a new one? Book a free survey and we'll give you a fixed price.
Common questions

Will I get a certificate after my boiler is moved?
Yes. Moving a gas boiler has to be reported under building regulations. Your Gas Safe engineer reports it within 30 days. You then get a Building Regulations Compliance Certificate in the post. The engineer also fills in the Benchmark checklist in the boiler manual. Keep both safe for when you sell.
Do I need planning permission to move a boiler?
Usually not. Work inside the house doesn't need it, and a flue on an outside wall is normally allowed in England. There are two exceptions. In a conservation area, keep the flue off a wall that faces the road. In a listed building, ask the council before any work starts.
Can you move a combi boiler from upstairs to downstairs?
Often, yes. Three things decide it: a safe place for the flue to go out, a gas pipe wide enough for the new run, and a drain for the condensate pipe. A downstairs spot is often closer to the gas meter. That can make the gas side simpler.
Can a regular boiler go in the loft?
Not usually. A regular boiler is fed by a small tank in the loft. That tank has to sit higher than the rest of the system to work. With the boiler up there too, there is rarely room above it. Many people switch to a combi or system boiler instead. Combi vs regular boiler.
Can a boiler be boxed in?
Yes, as long as the boxing keeps the gaps the maker asks for. The front panel must come off easily, so the engineer can reach the boiler for a service or repair. Never cover the flue, and never block any air vents. A simple cupboard door is often the easiest way.
Can you move just the boiler flue?
Sometimes. A flue can often be turned or made longer, with extra bends. But each maker sets a limit on how long the flue can be. The end must also stay a safe distance from windows and doors. A Gas Safe engineer checks both before changing it.
Can I move a boiler myself?
No. By law, any work on a gas boiler or gas pipe must be done by a Gas Safe registered engineer. That covers taking the boiler off the wall, the new gas pipe and the flue. A DIY move can leak gas or fumes, and it can't be signed off under building regulations.

Thinking of moving your boiler?
Call us to book a free survey. We'll look at where you'd like the boiler to go, and check the flue, gas and drain routes. Then you get a fixed price before any work starts.
