Blog · Updated 18/10/2026 · Express Contractors
Why RCDs are your home's most important electrical safety feature
A residual current device (RCD) watches the current going out on the live wire and coming back on the neutral. If the two differ by more than a small amount (30 milliamps for the RCDs that protect people), some current is leaking somewhere it shouldn’t, possibly through a person. The RCD cuts the power in a fraction of a second, fast enough to prevent a fatal shock in most cases.
Fuses and circuit breakers don’t do this. They protect the cables from overload and short circuits. They won’t trip for the small current that can kill a person.
How to tell if you have one
Open the consumer unit (fuse board) cover. An RCD is a wider switch, usually marked “RCD” with a small T or Test button. Some boards use RCBOs instead, which combine a breaker and an RCD for each circuit and also have a test button. If your board has only old fuse carriers or breakers with no test buttons, you very likely have no RCD protection.
Test it regularly
Press the test button every few months, as the label on the device recommends. The RCD should trip straight away. Switch it back on. If it doesn’t trip, call an electrician, because it may not work when needed.
Why does my RCD keep tripping?
Usually the RCD is doing its job:
- A faulty appliance, often a kettle, washing machine, oven element or outdoor equipment.
- Water getting in, to an outside socket, garden lights or a bathroom fan.
- A wiring fault on one of the circuits.
To narrow it down, unplug everything, reset the RCD, then plug things back in one at a time. If it trips with nothing plugged in, the fault is in the wiring. That needs an electrician, and if you can’t get power back, an emergency callout.
Plug-in RCDs for garden tools
If your house doesn’t have RCD protection yet, a plug-in RCD adapter is a cheap stopgap for lawnmowers, hedge trimmers and pressure washers. You plug it into the socket, then plug the tool into it. It isn’t a replacement for proper protection in your fuse box, but it makes outdoor jobs much safer in the meantime.
One RCD or lots?
Many fuse boards from the 2000s and 2010s have two RCDs, each protecting half the circuits. That’s much better than none, but one fault can switch off half the house, including the fridge and freezer. Newer boards often use RCBOs, which give each circuit its own protection. If one trips, everything else stays on, so a fault in the kitchen won’t leave you sitting in the dark.
RCDs and your EICR
Missing RCD protection is one of the most common reasons an EICR is coded C2 and marked unsatisfactory. If your board has none, a consumer unit upgrade is usually the most cost-effective fix. See 7 common reasons a home fails an EICR.

Need an electrician? Call 0121 517 0785, or see our EICR and electrical services.
